Which special testing environments need to be customized for endoscopes?

Even so, there are still many special monitoring environments that cannot be done by ordinary endoscopes. For example, the monitoring environment has corrosive liquids, abnormally narrow pipe area, etc. This situation can only be Realize customization so that we can cope with different special testing environments;

So which special testing environment needs to be customized for endoscopes? The editor of micro -vision optoelectronic editor will explain it in detail;

1. The corner angle of the test pipeline is particularly large, and it may need to turn a few curves. In this case, you need to customize 360 ° freely rotating and the maximum vision range to maximize the conditions;

2. There are corrosive liquids in the monitoring environment. In such an environment, the materials requirements for wire tubes and probes are very high. It must be enough to resist corrosion to complete the detection task. In this case, it must be customized in pipeline materials. Also change the pipeline;

3. The endoscope must have the function of explosion -proof. This not only needs to insert the tube to customize the special materials, but even the host shell needs to be customized, so as to fully meet this special monitoring environment;

4. Hand-holding endoscopic equipment pipeline requires high temperature or low temperature; currently the industrial endoscopic pipelines on the market are in terms of temperature tolerance, which can be controlled at about -40 ° ~ 85 °. Each manufacturer can be based on it according to Different from the detection environment and customize the endoscopic equipment of different material grades;

5. Customize the length of the pipeline. The longer the length of the pipeline, the worse the degree of control of the bending, because it will be affected by the transmission process of the signal line, and the distance will also affect the control of the probe to a certain extent;

In general, if a long distance pipeline is required to detect, if more than ten meters, the probe 360 ° turning is needed, which needs to determine the diameter of the pipeline;

Many different functions can be customized according to customer needs in the face of complex detection environments. Relatively speaking, the flexibility is still very large, and it can also meet the customization needs of many customers. Micro -vision optoelectronics can customize endoscopic products according to your different detection needs.