What special testing scenarios can customized endoscope be used in

Industrial endoscopes have actually done very detailed functional in terms of function, because there are many scenarios that need to be applied, and the special environment is also very postgraduate product performance;

Even so, there are still many special monitoring environments that cannot be done by ordinary endoscopes. For example, the monitoring environment has corrosive liquids, abnormal pipeline area, etc. Realize customization to cope with different special detection environments;This situation can only be customized under the subdivision of the endoscope, so as to cope with different special testing environments;

So which special testing environment needs to be customized for endoscopes?

1. The corner angle of the test pipeline is particularly large, and it may need to turn a few curves. In this case, the endoscope with 360 ° freely rotated and the maximum view angle range is required to meet the conditions to the greatest extent;

2. There are corrosive liquids in the monitoring environment. In such an environment, the materials requirements for wire tubes and probes are very high. It must be enough to resist corrosion to complete the detection task. In this case, it must be customized in probe materials. In addition, change the probes;

3. The endoscope must have explosion -proof functions. This not only needs to insert the tube to customize the special materials, but even the host shell needs to be customized, so as to fully meet this special monitoring environment;

4. Endoscope equipment probes require high temperature resistance or low temperature; currently the material of the industrial endoscope probes on the market is tolerate in temperature, which can be controlled at about -40 ° ~ 85 °. Different and customized endoscopic equipment of different material grades; Each manufacturer can customize different material -level endoscope equipment according to the different detection environment;

5. Customized the length of the probes. The longer the length of the probes, the worse the degree of control of the bending, because it will be affected by the transmission process of the signal line, and the distance will also affect the control of the probe to a certain extent;

In general, if a long distance probe is required to detect, if more than ten meters, the probe 360 °articulation turning is needed, which needs to determine the diameter of the probes;

Many different functions can be customized according to customer needs in face of complex testing environments. Relatively speaking, the flexibility is still very large, and it can also meet the customization needs of many customers. VSNDT can customize endoscopic products according to your different detection needs.