Industrial endoscopic detection operations are a complex and professional work. There are greater risks in operations. If industrial endoscopic detection is a little careless, it may cause damage to the industrial endoscopy probe, and even cause the entire gas turbine to replace. Therefore, it is necessary to be cautious to carry out the testing of gas turbines.
So what are the precautions for using industrial endoscopes?
1. Before carrying out industrial endoscopic detection operations, you should choose a suitable optical probe and check whether the probe is clean. Once the probe is polluted, it should be cleaned in time to ensure the effectiveness of the industrial endoscope detection.
2. For the gas turbine, it is necessary to wash and dry the gas turbine before implementing industrial endoscopic detection operations to prevent the surface of the blade surface from attaching dust to affect the industrial endoscope effect; at the same time, the temperature inside the gas turbine should be checked. The gas turbine is dragged to cool the device naturally; before the probe enters the inside of the gas turbine, it is necessary to ensure that the temperature inside the gas turbine is lower than 80 C to protect the probe from being damaged.
3. The parts of the industrial endoscope detection are different, and the probe inserted through the probe is different. Even if the same part, there may be a variety of ways to enter. According to the actual situation of the compression unit Mirror work.
4. When checking different blades in the same position, rotate the blades at a fixed speed, and the leaf speed may cause damage to the probe. If the lens falls in or is stuck inside the gas turbine, it needs to be stopped for maintenance, and the lens is removed with a special grabbing tool; if it cannot be removed, the gas turbine needs to be returned to the factory for maintenance to generate high maintenance costs.
The above is the precautions for using industrial endoscopes to detect gas turbines. If you have other related content, you need to consult, you can contact Shenzhen Micro Vehicle Optoelectronics Technology Co., Ltd. to look forward to your call.
Industrial borescope
solution service provider
