Several factors affecting endoscopy equipment detection results

Since they all have professional endoscopic equipment, they must be more efficient in the test results, so as to solve some unknown troubles, but when the endoscope equipment is used As a result, in addition to the factors of improper operation, what other factors that affect the detection results of the endoscope equipment? The following micro -vision photoelectric editor will take you to find out;

The first is the lighting of the probe; this is also the most basic condition. The brightness of the probe must meet the basic industrial conditions to test it. Generally, the lighting of the industrial endoscope needs to reach 100,000+lux to obtain it before obtaining it. HD image quality;

The second is the deeper position of the probe and angle; in general, the probe of the endoscope should be as close as possible as possible, and the effect of observation is the best. Generally, the deep range can reach 3-30mm observation. The obtained images obtained. The quality is very high, and the accuracy of the detection effect is also the best;

Another pixel of illumination and camera can be considered complementary. The pixels can reach a million level. In addition, the brightness of the probe can meet the requirements. Basically

The third is to detect the surface imaging reflectivity of the object, the detection material materials and the degree of rough surface of different materials, and its reflection imaging rate is also different. The actual detection effect should be determined according to the actual situation to determine the lighting of the video endoscopy according to the actual situation. Strong, so as to get the highest quality image picture;

The fourth is the channel of the detection object. When detecting, choose the position of the detection object as close as possible. The channel length also avoids too long to avoid affecting the number and degree of the probe bending;