Industrial endoscopes also have this function during the detection of mechanical equipment!

Due to the requirement of large-scale heavy industry equipment manufacturers that users cannot dismantle the equipment spindle on their own, conventional diagnostic methods cannot see the specific situation inside the equipment failure point, and it has been impossible to thoroughly inspect the equipment failure, resulting in the equipment failure being unable to be eliminated. To understand this issue, it is necessary to use a fault diagnosis equipment - an industrial endoscope - to transmit the images collected from the top of the industrial endoscope to the monitor for display. Without dismantling the equipment, the internal fault point can be observed and judged, greatly improving the identification rate and reliability of equipment faults. At the same time, guide the troubleshooting operation on the image of the industrial endoscope, and successfully complete the equipment troubleshooting work.
The loss of mechanical equipment that can be inspected by industrial endoscopy is not only a change in shape and structure, but also a loss after a chemical reaction occurs. If the surface of mechanical products is corroded, solids will gather together. The surface is not smooth, and many small shadows can be seen under the magnification of the endoscope, which is likely to cause corrosion. It is also prone to wear and tear at the welding site. After all, this is a splicing process or there may be gaps, and the gaps between the two materials are easily worn out.
Industrial endoscopes typically have the following characteristics: firstly, the lens size is relatively small, making it easy to enter the interior of the machine. In addition, the industrial endoscope is waterproof, the camera is completely sealed, and its lens is replaceable. This provides convenience for users, while industrial endoscopes have good flexibility, with lenses that can be bent 120 degrees, so there is no need to worry about internal operations inside the machine. This is also its unique feature, so the machine's lens is equipped with ultra clear high-speed lighting, allowing inspectors to clearly observe the internal structure even in low light conditions.
In addition, with the help of industrial endoscopes, inspectors can easily detect whether there are missing or redundant components during the assembly process of mechanical equipment components, which is very helpful for workers' work. By checking for color changes, it is easy to find damaged parts.