Exactly what defects can be checked in industrial endoscopes?

Using industrial endoscopic inspection or maintenance of bearings can directly observe the internal conditions of the bearings, check the bearing grinding situation and potential damage, and take appropriate solutions to avoid unnecessary risks.

So, what defects of the bearing can be checked in the industrial endoscopy? Today, the editor of Weishi will answer it for you.

1. Check the crack

You can use industrial endoscopes to check various raw materials cracks, forging cracks, heat treatment cracks and grinding cracks to avoid these cracks from being able to expand rapidly in the source of stress concentration during the subsequent operation of the bearing, which leads to the bearing rupture, which affects the bearings of the bearings. Life life and work safety.

2. Check the mechanical scars

Electronic video endoscopes can check wear, scratch, compression, bumps, etc. to avoid such defects that cause poor bearing installation, causing loading and stress concentration, affecting the rotation accuracy and service life of the bearings.

3. Rust rot, black skin and hemp point

Industrial endoscopes can check the defects such as rust rot, black leather, and hemp, to avoid the development of the defects into corrosion, which causes pollution sources of poor installation, early wear and fatigue, and even causes the bearings to scrap directly when the rust is severe.

4. Welding quality

Industrial endoscopes can observe whether the location of the welding is correct, whether the welding point is too large or too small, whether the welding does not solid or excessive welding causes the rolling body stuck. The decrease in noise and rotation accuracy, in severe cases, can even lead to a bulk rack, causing mechanical failure or accident.

Micro -vision high -definition industrial endoscope can help you check whether the mechanical bearings parts have defects and bearing wear, so as to check the situation in a timely manner to ensure the normal operation of the machine. If you have relevant needs, please contact industrial endoscopic manufacturers Shenzhen Micro -Electric Electricity Technology Co., Ltd.!