Do you know what is the most intuitive non -destructive detection technology?

Conventional non -destructive testing techniques include: ray detection, magnetic powder detection, penetration testing, industrial endoscopic detection, etc. But do you know what is the most intuitive lossless detection technology? It is an endoscopic equipment detection.

1. Radio detection is to inject rays into inspection, and then use film photos, fluorescent screens and other methods to detect the strength of the inspection or internal defects by detecting the radical strength after being checked;

2. Magnetic powder detection is a magnetic mark with a larger size and higher contrast by viewing the corresponding defects and higher contrast.

3. The penetration test is to enter the defect of the infiltration fluid. After the excess permeability is out, the osmotic fluid in the residual defect can adsorb the imaging agent to form a defective image with higher contrast and magnification.

The above -mentioned non -destructive detection methods are intuitive, but industrial endoscopic detection does not require additional assistance such as penetration liquid, magnetic powder and other additional assistance, and will not be affected by the structure layer. , For inspection staff to view.

Industrial endoscopes can become the most intuitive non -destructive detection technology, mainly due to its slender probe, bright lighting, and its imaging principle.

1. The front end of the industrial endoscope is often only a few millimeters. It can replace the eyes of the people. It is very easy to enter the inside of the inspection from the small pores of the equipment and castings.

2. Industrial endoscopy comes with lighting sources, usually the inside of the inspection object is relatively dim. After the light source comes with the endoscope illuminates the internal light, the testing staff can clearly observe the internal situation.

3. The sensor at the front end of the industrial endoscope probe will convert the internal image of the captured equipment. At the same time, the electronic image signal is transmitted to the display device of the test personnel in real time. See the internal situation with your own eyes.

With intuitive and simple characteristics, industrial endoscopes have been widely used in aviation, aerospace, civil aviation, energy, electric power, petrochemicals, automobiles, ships, machinery manufacturing, fine chemical and other industries. If you have relevant needs, please contact Shenzhen Micro Vehicle Optoelectronics Technology Co., Ltd. to consult.